石墨炉原子吸收法测定PU材料中的铬

采用微波消解技术进行样品前处理,建立了石墨炉原子吸收法测定PU材料中铬含量的方法。在波长429.0 nm下,利用石墨炉程序升温测定,狭缝设为0.5 nm,塞曼效应作为背景校正。标准工作曲线线性良好,相关系数r=0.9986,方法检出限为0.051μg/L,测定结果的相对标准偏差为3.78%,加标回收率为92%～120%(n=6)。该方法简便、可行,适用于PU材料中铬的测定。     

Two New Abietane Diterpenoids from the Roots of Tripterygium wilfordii Hook. f.

Two new abietane‐type diterpenoids, named triptobenzene R ( 1 ) and triptobenzene S ( 2 ), together with three known abietane‐type diterpenoids, triptophenolide ( 3 ), triptonodiol ( 4 ), and triptonoterpene methyl ether ( 5 ), were isolated from the roots of Tripterygium wilfordii Hook . f. Their structures and relative configurations were established by detailed spectral studies, including 1D‐ and 2D‐NMR (HSQC, HMBC, and NOESY), and HR‐ESI‐TOF‐MS, and by comparison with published data. Their absolute configurations were assigned by the CD technique, applied for the first time to abietane diterpenes from Tripterygium wilfordii. Compound 2 is the first abietane‐type norditerpenoid isolated from the genus Tripterygium.     

Crystal structures of azido or thiocyanato-coordinated nickel(II) complexes with tridentate Schiff bases

A new azido-coordinated nickel(II) complex [NiL¹(N₃)] (1) and a new thiocyanato-coordinated nickel(II) complex [NiL²(NCS)] (2), where L¹ and L² are the monoanionic forms of Schiff bases 2-[(2-isopropylaminoethylimino)methyl]-6-methylphenol and 2-[(2-dimethlaminoethylimino)methyl]-6-methylphenol respectively, are prepared and structurally characterized by elemental analysis, IR spectra, and single crystal X-ray crystallography. Complex 1 crystallizes in the triclinic space group P-1 with unit cell dimensions a = 8.812(2) Å, b = 9.433(3) Å, c = 9.488(2) Å, α = 81.933(2)°, β = 69.925(2)°, γ = 84.591(2)°, V = 732.5(3) ų, Z = 2, R ₁ = 0.0291, and wR ₂ = 0.0734. Complex 2 crystallizes in the monoclinic space group P2₁/n with unit cell dimensions a = 7.4497(4) Å, b = 6.1933(3) Å, c = 31.5126(18) Å, β = 92.484(2)°, V = 1452.57(13) ų, Z = 4, R ₁ = 0.0307, and wR ₂ = 0.0668. The Ni atom in each of the complexes is coordinated by three donor atoms of the Schiff base ligand and by one N atom of the azide or thiocyanate ligand, forming a square planar geometry. The azide and thiocyanate anions readily coordinate to the complexes as secondary ligands.     

A lead(II) sensor based on a glassy carbon electrode modified with Fe3O4 nanospheres and carbon nanotubes

We have developed a highly sensitive and selective sensor for lead(II) ions. A glassy carbon electrode was modified with Fe₃O₄ nanospheres and multi-walled carbon nanotubes, and this material was characterized by scanning electron microscopy and X-ray diffraction. The electrode displays good electrochemical activity toward Pb(II) and gives anodic and cathodic peaks with potentials at ?496 mV and ?638 mV (vs. Ag/AgCl) in pH?6.0 solution. The sensor exhibits a sensitive and fairly selective response to Pb(II) ion, with a linear range between 20 pM and 1.6 nM, and a detection limit as low as 6.0 pM (at a signal-to noise ratio of 3). The sensor was successfully applied to monitor Pb(II) in spiked water samples.

Theory of the magnon Kerr effect in cavity magnonics

We develop a theory for the magnon Kerr effect in a cavity magnonics system, consisting of magnons in a small yttrium iron garnet(YIG) sphere strongly coupled to cavity photons, and use it to study the bistability in this hybrid system. To have a complete picture of the bistability phenomenon, we analyze two different cases in driving the cavity magnonics system, i.e.,directly pumping the YIG sphere and the cavity, respectively. In both cases, the magnon frequency shifts due to the Kerr effect exhibit a similar bistable behavior but the corresponding critical powers are different. Moreover, we show how the bistability of the system can be demonstrated using the transmission spectrum of the cavity. Our results are valid in a wide parameter regime and generalize the theory of bistability in a cavity magnonics system.     

Half‐sandwich Ruthenium (II) complexes with triphenylamine modified dipyridine skeleton and application in biology/luminescence imaging

Four half‐sandwich ruthenium^II (Ru^II) complexes with triphenylamine‐modifed dipyridine frameworks were synthesized and characterized. The cytotoxicity of target complexes toward A549 (lung cancer cells), HeLa (cervical cancer cells) and HepG2 (hepatoma cells) were obtained by the MTT assay, which were superior to cisplatin with the IC₅₀ values changed from 2.4 ± 0.1 μM to 9.2 ± 2.7 μM. Meanwhile, complexes possess the ability of antimetastasis to cancer cells. Ru^II complexes could be transported by serum albumin, catalyze the conversion of NADH (the reduced state of nicotinamide‐adenine dinucleotide) to NAD⁺ and induce the accumulation of reactive oxygen species, which confirmed the antineoplastic mechanism of oxidation. Ru^II complexes could enter A549 cells followed by a non‐energy dependent cellular uptake mechanism, target lysosomes with the Pearson's colocalization coefficient of 0.75, lead to lysosomal damage, disturb the cell cycle (S phase), and eventually induce apoptosis. The results demonstrate that these Ru^II complexes are potential anticancer agents with dual functions, including metastasis inhibition and lysosomal damage.     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715     

Synergism of Interface and Electronic Effects: Bifunctional N-Doped Ni3S2/N-Doped MoS2 Hetero-Nanowires for Efficient Electrocatalytic Overall Water Splitting

The realization of water electrolysis on the basis of highly active, cost-effective electrocatalysts is significant yet challenging for achieving sustainable hydrogen production from water. Herein, N-doped Ni₃S₂/N-doped MoS₂ 1D hetero-nanowires supported by Ni foam (N-Ni₃S₂/N-MoS₂/NF) are readily synthesized through a chemical transformation strategy by using NiMoO₄ nanowire array growth on Ni foam (NiMoO₄/NF) as the starting material. With the in situ generation of Ni₃S₂/MoS₂ heterointerfaces within nanowires and the incorporation of N⁻ anions, an extraordinary hydrophilic nature with abundant, well-exposed active sites and optimal reaction dynamics for both oxidation and reduction of water are obtained. Attributed to these properties, as-converted N-Ni₃S₂/N-MoS₂/NF exhibits highly efficient electrocatalytic activities for both hydrogen and oxygen evolution reactions under alkaline conditions. The superior bifunctional properties of N-Ni₃S₂/N-MoS₂/NF enable it to effectively catalyze the overall water-splitting reaction.     

Resolving quantum dots and peptide assembly and disassembly using bending capillary electrophoresis

Despite the numerous techniques developed for the studying nanoparticle and peptide interaction nowadays, sensitive and convenient assay in the process of flow, especially to simulate the self‐assembly of quantum dots (QDs) and peptide inflow in blood vessels, still remains big challenges. Here, we report a novel assay for studying the self‐assembly of QDs and peptide, based on CE using a bending capillary. We demonstrate that the semicircles numbers of the bending capillary affect the self‐assembly kinetics of CdSe/ZnS QDs and ATTO‐D₃LVPRGSGP₉G₂H₆ peptide. Moreover, benefitting from this novel assay, the effect of the position on the self‐assembly has also been realized. More importantly, we also demonstrate that this novel assay can be used for studying the stability of the QDs–peptide complex inflow. We believe that our novel assay proposed in this work could be further used as a general strategy for the studying nanoparticle–biomolecule interaction or biomolecule–biomolecule interaction.